Rasberry Pi - IO experiment

Now the IO experiments with the Rasberry Pi. The very first experiment of mine with the PI was is IO experiment light up the LED bulb.

   The experiment and equipment needed for the experiment:

• Raspberry Pi kit
• 1 LED
• 2 200 ohms Resistors
• Connectors
• Breadboard

Connect the T board on the breadboard and make connections in such a way that LED, resistor, Raspberry Pi are all connected in series.

The connections are shown in the figure below:

   

Used GPIO2 and Ground pins for connecting LED output pin and the other circuit. 

Made connections. I did this successfully, Finally, I was able to make the light glow.

'Here is the Video of the execution